CPHR SERVICES

It took you weeks to get the right person. You negotiated the offer, you waited out a long notice period, and finally welcomed them through the door. Then the laptop is not ready, the manager is travelling, and nobody knows where the new joiner should be sitting. A month on, the resignation email lands.

Every week in Indian companies, there is a situation that happens. There is good news. Most early exits can be avoided. In this guide, you’ll learn what NOT to do when a new hire comes onboard, why each of these things is bad, and what to do instead.

At CPHR Services, a Pune-based HR firm that has been helping employers since 2006, we see the same joining mistakes being repeated across sectors. Now let’s separate them.

Why the First 90 Days of a New Employee Matter

That’s why so much attention is given to the early weeks. New joiners make rapid decisions about whether they made the right choice, and most companies give them reasons to have doubts.

  • Only a few companies do it right. Only 12% of employees strongly agree that their organisation does a great job of welcoming new hires, while only 29% of new hires feel fully prepared and supported to excel after induction.
  • Early round exits are the norm. Gallup says that companies often lose a third to two-thirds of new hires in the first year, and about a third of new employees don’t make it past 90 days. A SHRM article says turnover can be as high as 20% in the first 45 days.
  • It takes time to become fully productive. It usually takes about 12 months for a new employee to reach full performance in a role. If you lose them early, you lose that whole investment.
  • Indian attrition is climbing. Overall attrition in India increased to 18% in 2026 from 16.2% in 2025, according to Aon. Poorly treated new joiners can be poached by rival companies easily.

The 10 Things to Avoid When a New Employee Comes on Board

Avoid these 10 mistakes in the first weeks of a new hire

  1. Go quiet between the offer and the start date
  2. “Day one, workstation not ready
  3. Delay in appointment letter and joining process
  4. Too much information at once
  5. Missing or unprepared manager
  6. Ambiguous objectives and unclear role expectations
  7. Let the new joiner deal with it on their own
  8. Policy and safety briefings are skipped
  9. Feedback is retained for the purpose of annual appraisal.
  10. Stopping the induction after the first week

1. Going silent between the offer and the joining date

In India, there’s often a 60- to 90-day gap between offer acceptance and day one, due to long notice periods, offering enough scope for counteroffers. “In this window, silence makes candidates wonder if they picked the right person.

Instead, do this: Call or text the candidate every other week. Post a welcome note from the manager, the first-week agenda, and details about the dress code, timings, and travel.

2. An unprepared workstation on day one

Nothing says ‘we forgot you were coming’ like a missing laptop, no email ID, and no access card. The recruit just sits around all day, idle and embarrassed.

Instead, do this: Submit IT and admin requests at least a week before. Set up email and payroll access, test the login, and have the desk, ID card, and any safety gear ready.

3. Delaying the appointment letter and joining paperwork

India’s four Labour Codes, which were in force from 21 November 2025, make appointment letters mandatory for all workers. Delays are a legal risk and a sign of disorganisation. Care also needs to be taken in collecting personal data: the Digital Personal Data Protection Rules give employers until 13 May 2027 to comply with the key notice, consent, and security obligations.

Do this instead: Give the appointment letter on or before day one. Digitally gather documents before you start, explaining the purpose of each, and keep them in a safe place.

4. Dumping too much information at once

Anyone can be overwhelmed by a day-long set of slide decks on company history, policies, and org charts. By evening, most of it is lost.

Instead, do this: do the induction over the first two weeks. Just tell them what they need to know this week and give them a simple reference doc for everything else.

5. An absent or unprepared manager

The HR manager knows more about the new joiner’s experience than anyone else in HR. If the manager is travelling, in back-to-back meetings, or simply unaware of the joining date, the new hire feels uncared for.

Instead, do this: Block out the first morning for the manager’s calendar. Ask them for a one-to-one in week one about the team’s work, priorities, and how they like to communicate.

6. Vague goals and unclear role expectations

Trust is lost quickly when the job is not what you were told it would be in hiring. Unclear goals make new joiners guess what success looks like.

Instead, do this: First week: Share a 30-60-90 day written plan. Verify that the job description promised the role. Provide three to five clear outcomes for each stage.

7. Leaving the new joiner to figure things out alone

New employees are scared to ask “dumb” questions and suffer in silence. People leave because they feel isolated in the first month.

Instead, do this: Assign a buddy (same team, friendly and patient, not the manager). Arrange a team lunch or tea break in the first week for natural introductions.

8. Skipping policy and safety briefings

Later, breaking workplace rules causes problems. New joiners need to be aware of the leave policy, code of conduct, safety procedures, and how to raise a concern. The Sexual Harassment of Women at Workplace Act, 2013, also mandates that the employers must inform the employees about the Internal Committee and the process of complaint.

Instead, discuss these topics in brief sessions during week one. Share the written copies and get a simple receipt acknowledgement.

9. Holding back feedback until the annual appraisal

It’s a waste of their time and yours to wait months before you tell someone they are on the wrong track. Silence also leaves good performers wondering if they are doing well.

Try this instead: In the first month, give small, specific feedback weekly. Celebrate early wins publicly and correct mistakes privately and kindly.

10. Ending the induction after the first week

Onboarding in many organisations is a one-day or one-week event. Then the support disappears, just as the new employee is getting into the real work.

Instead, do this: Schedule formal progress meetings at 30, 60 and 90 days. Ask them what’s working, what’s confusing, and what help they need. At the end of the 90 days, review the plan from point 6.

New Employee Joining Checklist: What to Do Instead

HR and managers’ next steps. Make the ten mistakes above into a simple routine using this checklist.

WhenWhat to doOwner
After offer acceptanceSend a welcome message, stay in touch every two weeks, and collect documents digitally.HR
One week before joiningRaise IT, admin and access requests; share the first-week agenda; pick a buddyHR and manager
Day 1Manager welcome, team introductions, appointment letter, workstation ready, team lunchManager and HR
Week 1Share the 30-60-90 day plan, hold policy and safety briefings, and assign a small first task.Manager
Day 30First structured check-in on role clarity, workload and support neededManager and HR
Day 60Review progress on goals; give specific feedback and fix any gaps.Manager
Day 90Formal review of the 30-60-90 day plan; set goals for the next quarter.Manager and HR

How to Tell Whether Your Joining Process Works

You can’t fix what you don’t measure. Monitor these five numbers for every batch of new joiners:

  • 90-day retention rate: The percentage of new hires who remain with you after three months.
  • Time to productivity: The number of weeks it takes for a new joiner to be able to do their job without close supervision.
  • New hire feedback scores: Quick surveys or conversations at 30, 60, and 90 days around role clarity, team support, and manager help.
  • Manager check-in completion: Did managers actually do the planned one-to-ones and reviews?
  • Early exit reasons: Themes from exit interviews of people who leave within the first six months.

Find patterns. If early exits cluster under one manager or one department, begin there. If many new joiners are saying the job is not what they expected, look at your job descriptions and interview process.

When Outside HR Support Makes Sense

Many growing companies add staff faster than they can develop an onboarding process. Paperwork, compliance checks, and manager coaching all vie for the same few hours.

Outside help can lift some of the burden. For example, CPHR Services offers a monthly retainer for HR consulting on a monthly retainer. The service includes setting up hiring and joining processes, HR policies, attendance and leave tracking, employee records, and compliance guidance. Its background verification service checks before the new hire joins, and its corporate training can help managers prepare for the new team members.

Regardless of who your champion is, the goal remains the same: a new joiner who feels expected, guided, and valued from the first call to the 90-day review.

Final Thoughts

The first few weeks of a new employee set the tone for everything that followed. Most early exits are due to simple, avoidable gaps: silence before you join, a desk that is not ready, a manager who is absent, and unclear goals. Fix those, keep providing support through day 90, and you will protect both your new hire and the money you spent to find them.

Next steps:

  • Look at the last five people you hired into your company and see which of the ten mistakes they made.
  • Share the above checklist as a template to all hiring managers.
  • Start measuring 90-day retention by department on your next cohort of joiners.

Frequently Asked Questions

What are the main things to avoid when a new employee comes on board?

Don’t go quiet before joining, leave the workstation unreadable, delay appointment letters, overload the person with information, have the manager absent, set vague goals, and leave the person alone. Don’t skip policy briefings, withhold feedback, and cut support after the first week either.

How long should the induction period for a new employee last?

Plan for at least 90 days with structured check-ins at 30 days, 60 days, and 90 days. Week 1: Introductions, Tools and Policies. The next few weeks are all about goals, feedback, and building confidence in the role.

Why do new employees quit in the first 90 days?

Typical causes are a job that isn’t what was promised, poor support from the manager, feeling isolated from the team, and a disorganised first week. Long silences before joining also expose candidates to counteroffers from other employers.

Is an appointment letter mandatory for new employees in India?

Yeah. The four Labour Codes that will come into force on 21 November 2025 mandate that all workers be provided an appointment letter by employers. Issue it on or before the first day and have a signed copy on file for audits.

What is a buddy system for new employees?

A buddy is an experienced colleague (not the manager) who helps a new joiner settle in. The buddy answers everyday questions, explains team habits, and makes introductions so the new hire feels comfortable asking for help early on.